 |
|
|
|
|
|
|
|
|
 |
MODEL CBS 5 FRAMING SPECIFICATIONS |
|
||||||
| Select other Framing Specifications: - EZ Arch Kits: New EZ Arch, 445 EZ Arch, 470 EZ Arch, RB3 EZ Arch - Custom Builder Special Arch Kits: Model CBS 3, Model CBS 4, Model CBS 5 - Solid Wood Arch Kits: Model L, Model B, Model C, Model J, Model A, Model R - Continuous Molding Arch Kits: Model CM |
|
|||||||
|
||||||||
 |
Clearance from ceiling sheetrock to top of key (5" casing) is approx. 8-1/4". Capital extends 1-1/8" from back edge of molding. Light switch boxes should *Subtract 12" off all vertical measurements when using | |
||||||
MATERIALS: Curved Header Casing is medium-density fiberboard. Column parts are kiln dried fingerjoint poplar. Jambs are face laminated veneers. FINISHED OPENING HEIGHTS: |
WIDTH OF FINISHED OPENING: Elliptical sizes: 28", 30", 32", 34", 36", 40", 42", 45", 48", 54", 57", 60", 64", 66", 72", 78", 84", 90", 96". Elliptical Rise 12". Custom heights, opening widths and jamb widths are available. |
|
||||||
| (IMPORTANT!): To assure proper sheetrock installation, toenail a 2x4 across opening at 15" below header. | Sheetrock both sides of opening down to this temporary 2x4. No special blocking in corners is necessary. | |
||||||
• Finished opening heights are standard: 92" from finished floor for 9' ceiling height and 80" for 8' ceiling height. • Minimum distance of framed opening to corner is 5-3/4". This allows for 3/4" thick baseboard with 1/2" return. • Frame opening width is finished opening width +2". • Rough opening must be within 1/4" of plumb, otherwise leave additional space. |
|
|||||||
Click here for a Printer Friendly PDF of this page. |
|
|||||||
 |
|
|||||||
Home > Framing Specs > Model CBS 5 Framing Specs |
|
|||||||
| ©2004 CurveMakers, Inc. All Rights Reserved. | |
|||||||